PIR Motion Sensor For Lights

Stand Alone Type

220 VAC Mains (Upto 1000W Incandescent) (300W Fluorescent Max.)

General Information
Motion sensor is a fully automatic indoor and outdoor security/courtesy light controller capable of controlling up to 1000W incandescent or 30W x 10 fluorescent of lighting. At night, the built in passive infrared (PIR) motion sensor turns on the connected lighting system when it detects motion in its coverage area. During the day, the built in photocell sensor saves electricity by deactivating the lights.

An adjustable time lets you select how long the light stays on after activation. The LITE adjustment determine at what light level the lighting system will start operating when you set the motion sensor to automatic mode,

NL90

HC-7E

Specifications NL90 HC-7E Power Requirement AC 220 ~ 240V / 50Hz AC 220 ~ 240V / 50Hz Lighting Load Max 1,000W Incandescent or Max 40W x 10 Fluorescent Max 1,000W Incandescent or Max 300 W Fluorescent Detection Angle Up to 110° at 20° C Up to 120° at 20° C Detection Distance Up to 12M at 20° C Min. 14M at 20° C Swiveling Angle Horizontal 190° Vertical 160° Horizontal 70° Vertical 35° Mounting Height Recommended 1.8 2.5M (5.9 ~ 8.2 Ft) Wall Mount or 2.5 ~ 4.0M (8.2 ~ 13.1Ft) Ceiling Mount Recommended 1.8 ~ 2.0M (5.9 ~ 6.6 Ft) Wall Mount or 1.8 to 2.5 meters Ceiling Mount Wall Switch Control On / Off / Manual Override On / Off Sensor Operation Auto Auto Time Adjustment 5 3 sec ~ 12 3min From ( 10 ± 5) sec. to ( 4 ± 1) minutes Lux Adjustment Approx. 0 ~ 1,000Lux. Approx. 0 ~ 1,000Lux Operating Temperature -20° C ~ +40° C -20° C ~ +40° C Warm Up Time About 1 min About 1 min Protection Class Class II II Protection Degree IP44 IP44